Recover data Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX not recognized , not working ,not showing up Windows 7/10 pc, not formatted,files deleted.
Use "Undelete" mode to recover deleted files from Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX after Virus attack,Recycle bin clear,disk cleanup,Press shift del by mistake,permanently empty recycle bin,shift delete ,accidentally deleted by a mistake.
Use "Unformat" mode to recover data from formatted Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX after quick format,full format,accidentally formatted,reformatting,High-level formatting,Low-level formatting.
Use "Recover partition" mode to restore data Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX partition corrupted lost or damaged or deleted.
Use "Full Scan" mode to repair Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX corrupted unreadable if partitions show as "raw" or recover deleted data which can not be found with "undelete" and "unformat" and "recover partition",rescue data from raw partition,recover data of partitons which are not NTFS,nor exfat,nor fat32.
Data loss reasons: Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX partition damaged or the partition table damaged, Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX not recognized laptop after using a partition software.Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX became raw or unformatted or unallocated, unknown partition,unpartitioned.Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX not formatted or format fail, Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX Accidental Deleted or lost or changed partition by chkdsk,convert,defrag,diskcomp,diskcopy,diskpart,fdisk,format, label,subst,scandisk,sys,vol,vssadmin, and partition magic.Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX not recognized windows 7/10/8.Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX not detected due to i o device error.BIOS error.The system drive error.Usb or bios power shortage.Western Digital Velociraptor 600 GB SATA III 10000 RPM 32 MB Cache Bulk/OEM 3.5 Inch Desktop Hard Drive - WD6000HLHX says raw, says i need to format it, says not initialized.
The PC enthusiasts favorite 10,000 RPM hard drive is still the fastest, most dangerous carnivore around - now with an ultra-fast 32 MB cache and SATA 6 Gb/s interface and twice the capacity of previous generations. Killer speed - SATA 6 Gb/s interface and 32 MB cache enhance the next generation 10,000 RPM WD VelociRaptor making it up to 15% faster than the award-winning previous generation. Monstrous capacity - WD VelociRaptor SATA drives are available in capacities up to 600 GB, double the capacity of the previous generation. Rock-solid reliability - Designed and manufactured to mission-critical enterprise-class standards to provide enterprise reliability in high duty cycle environments. With 1.4 million hours MTBF, these drives have the highest available reliability rating on a high capacity SATA drive. Ultra-cool operation - Consumes less idle power and uses similar active power as the previous generation WD VelociRaptor, while offering double the capacity and higher performance.
Many Windows users have run into such a problem: connect external hard drive or USB flash drive to the computer and find that it’s not recognized. The accident can be caused by many reasons, for example, using the wrong file system, partition issues on your external drive, driver issues in Windows, dead USB ports, or some other unknown reasons. Next we will show you how to fix all these external drive not recognized problems in Windows. Recover data from lost partitions due to re-partition, boot manager, improper clone, system re-installation, disk accident etc. data recovery after system crash, hard drive error or failure, virus attack, unexpected power off, etc. Recover lost data due to accidental deletion, emptying recycle bin, and 'shift+delete' command without backups.
Aidfile Recovery Software Keyfeature
support FAT32 EXFAT NTFS RAW file system
support Windows 10,2003,2008,2012,XP,Vista,7,8,(32&64 bits)
MS Office document (Word, Excel, PowerPoint, Outlook) types (doc, docx, ppt, pptx, xls, xlsx, pst, etc.),photos (JPG, PNG, ICON, TIF, BMP, RAF, CR2, etc.), videos and audios (MPG, MP4, MP3, MTS, M2TS, 3GP, AVI, MOV, RM, RMVB, etc.), compressed files (rar, zip, etc.), PE files (exe, dll, lib, etc.) and so on
